Legacy Downloads
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

version 2.3.8
Updated for Mac OS Mojave and FCPX 10.4.6. Easier access to Accessibility settings.
Download includes MCS5 application, documentation, driver, keysets and all necessary support files.
Updates installation notes. Download includes Nuage Panner/Eclipse PX application, driver, Nuendo panner device plug-in and all necessary support files.

Updated for Mac OS 10.13 (High Sierra). Manual updated to cover use with Pro Tools™. Download includes Nuage Panner/Eclipse PX application, documentation, driver, Nuendo panner device plug-in, Logic control surface plugin and all necessary support files.
DO NOT USE WITH "Eclipse Ethernet Software for OS X™".
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

Updated for Mac OS 10.12 (Sierra).
Set frame rate, start and stop times and perform batch striping.
MCS3 Keyset Editor Software and Drivers for Windows 8.1, 8 and 7. Supports MCS3-USB and MCS3-RS232 only. Not for use with MCS-2, MCS-3P, MCS-3S, MCS-3SP or MCS-5.

Compatible with Lion™, Mountain Lion™ and Mavericks. 64 bit only. Fixes memory management issue.
Download includes MCS-3000 application, driver and all necessary support files.

Adds lockable keysets, new keysets for Pro Tools™, GarageBand™, iMovie™ and iTunes™, and fixes stability issues.
Download includes MCS5 application, documentation, driver, keysets and all necessary support files.

Compatible with OS X 10.7, 10.8 and 10.9. 64 bit only. Fixes setup and stability issues under OS X 10.9 (Mavericks).
Download includes MCS3 application, documentation, driver and all necessary support files.
For MCS3 only. Does not work with MCS3 SP.
JLCooper MCS3 USB.
FCP X 10.0.6 or later recommended.

Compatible with OS X 10.7, 10.8 and 10.9. 64 bit only. Fixes setup and stability issues under OS X 10.9 (Mavericks).
Download includes MCS3 SP application, documentation, driver and all necessary support files.
For MCS3 SP only. Does not work with MCS3.
JLCooper MCS3 SP USB.
FCP X 10.0.6 or later recommended.

Compatible with Lion™ and Mountain Lion™. 64 bit only.
Performance improvements.
Download includes FM-4/100 application, documentation, driver and all necessary support files.

Compatible with Lion™ and Mountain Lion™. 64 bit only. Improves performance with FCP X™ 10.0.8.
Download includes all necessary software and documentation.
FCP X 10.0.6 or later recommended.

Compatible with Lion™ and Mountain Lion™. 64 bit only. Improves performance with FCP X™ 10.0.8.
Download includes MCS-3000 application, driver and all necessary support files.
This tool is for configuring the Ethernet ports on the Eclipse PX, Nuage Panner and SloMo Elite.

Fixes intermittent problem connecting with the Eclipse Color Plugin. 3.1.4 fixed problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS-3000 application, driver and all necessary support files.
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes all necessary software and documentation. Snow Leopard™ compatible.

Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS-3000 application, driver and all necessary support files.
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS3 SP application, documentation, driver and all necessary support files.
For MCS3 SP only. Does not work with MCS3.
JLCooper MCS3 SP USB
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS3 application, documentation, driver and all necessary support files.
For MCS3 only. Does not work with MCS3 SP.
JLCooper MCS3 USB
This documentation details the configuration of the Compact Ethernet Interface (JLCooper P/N 920444-4) for the Eclipse MX, MCS-3000XL, RackShot and KeyShot and, the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394).
This utility allows the programming of macro messages and button labels in the KeyShot and RackShot. Supports v1.10M firmware only. Requires KeyShot or RackShot with RS-232, RS-422 or USB Interface card.
Universal Binary.
Improves custom MIDI functions. Fixes cosmetic problem in user interface.
This software allows the remote capture and analysis of Sony 9 Pin commands using the BusAlyzer.
MCS3 Driver and Keyset Editor for Windows XP, 2000, Me and 98. Supports MCS3-USB and MCS3-RS232 versions.
This utility allows you to backup and restore user information such as clips and system settings stored in the MCS-ClipShot via Ethernet or Serial connection. Requires firmware version v1.29 or later in the MCS-ClipShot.
XP/2000
This utility allows a user to configure the Ethernet Interface in the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
This driver allows the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet to appear as a virtual com port in Windows. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
Set frame rate, start and stop times and perform batch striping.
Keyset Editor for MCS2. If you are using the MCS2-USB, you'll also need to install the Windows Drivers for FTDI Serial/USB chip.
MIDI Interface and JLCooper PPS-2.
This software allows the remote capture and analysis of Sony 9 Pin commands using the BusAlyzer.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.
This documentation details the configuration of the Compact Ethernet Interface (JLCooper P/N 920444-4) for the Eclipse MX, MCS-3000XL, RackShot and KeyShot and, the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394).
This utility allows a user to configure the Ethernet Interface in the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

Compatible with Lion™ and Mountain Lion™. 64 bit only.
Performance improvements.
Download includes FM-4/100 application, documentation, driver and all necessary support files.
Universal Binary.
Improves custom MIDI functions. Fixes cosmetic problem in user interface.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.
This documentation details the configuration of the Compact Ethernet Interface (JLCooper P/N 920444-4) for the Eclipse MX, MCS-3000XL, RackShot and KeyShot and, the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394).
This utility allows the programming of macro messages and button labels in the KeyShot and RackShot. Supports v1.10M firmware only. Requires KeyShot or RackShot with RS-232, RS-422 or USB Interface card.
This utility allows a user to configure the Ethernet Interface in the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

Compatible with Lion™ and Mountain Lion™. 64 bit only. Improves performance with FCP X™ 10.0.8.
Download includes all necessary software and documentation.
FCP X 10.0.6 or later recommended.
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes all necessary software and documentation. Snow Leopard™ compatible.
Keyset Editor for MCS2. If you are using the MCS2-USB, you'll also need to install the Windows Drivers for FTDI Serial/USB chip.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

Compatible with Lion™, Mountain Lion™ and Mavericks. 64 bit only. Fixes memory management issue.
Download includes MCS-3000 application, driver and all necessary support files.

Compatible with Lion™ and Mountain Lion™. 64 bit only. Improves performance with FCP X™ 10.0.8.
Download includes MCS-3000 application, driver and all necessary support files.

Fixes intermittent problem connecting with the Eclipse Color Plugin. 3.1.4 fixed problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS-3000 application, driver and all necessary support files.

Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS-3000 application, driver and all necessary support files.
This documentation details the configuration of the Compact Ethernet Interface (JLCooper P/N 920444-4) for the Eclipse MX, MCS-3000XL, RackShot and KeyShot and, the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394).
This utility allows you to backup and restore user information such as clips and system settings stored in the MCS-ClipShot via Ethernet or Serial connection. Requires firmware version v1.29 or later in the MCS-ClipShot.
XP/2000
This utility allows a user to configure the Ethernet Interface in the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
This driver allows the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet to appear as a virtual com port in Windows. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.
MCS3 Keyset Editor Software and Drivers for Windows 8.1, 8 and 7. Supports MCS3-USB and MCS3-RS232 only. Not for use with MCS-2, MCS-3P, MCS-3S, MCS-3SP or MCS-5.

Compatible with OS X 10.7, 10.8 and 10.9. 64 bit only. Fixes setup and stability issues under OS X 10.9 (Mavericks).
Download includes MCS3 application, documentation, driver and all necessary support files.
For MCS3 only. Does not work with MCS3 SP.
JLCooper MCS3 USB.
FCP X 10.0.6 or later recommended.

Compatible with OS X 10.7, 10.8 and 10.9. 64 bit only. Fixes setup and stability issues under OS X 10.9 (Mavericks).
Download includes MCS3 SP application, documentation, driver and all necessary support files.
For MCS3 SP only. Does not work with MCS3.
JLCooper MCS3 SP USB.
FCP X 10.0.6 or later recommended.
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS3 SP application, documentation, driver and all necessary support files.
For MCS3 SP only. Does not work with MCS3.
JLCooper MCS3 SP USB
Fixes problem with Timecode Viewer in FCP and intermittent communication problems.
Download includes MCS3 application, documentation, driver and all necessary support files.
For MCS3 only. Does not work with MCS3 SP.
JLCooper MCS3 USB
MCS3 Driver and Keyset Editor for Windows XP, 2000, Me and 98. Supports MCS3-USB and MCS3-RS232 versions.

version 2.3.8
Updated for Mac OS Mojave and FCPX 10.4.6. Easier access to Accessibility settings.
Download includes MCS5 application, documentation, driver, keysets and all necessary support files.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.

Adds lockable keysets, new keysets for Pro Tools™, GarageBand™, iMovie™ and iTunes™, and fixes stability issues.
Download includes MCS5 application, documentation, driver, keysets and all necessary support files.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.
Updates installation notes. Download includes Nuage Panner/Eclipse PX application, driver, Nuendo panner device plug-in and all necessary support files.

Updated for Mac OS 10.13 (High Sierra). Manual updated to cover use with Pro Tools™. Download includes Nuage Panner/Eclipse PX application, documentation, driver, Nuendo panner device plug-in, Logic control surface plugin and all necessary support files.
DO NOT USE WITH "Eclipse Ethernet Software for OS X™".
This tool is for configuring the Ethernet ports on the Eclipse PX, Nuage Panner and SloMo Elite.

Updated for Mac OS 10.12 (Sierra).
Set frame rate, start and stop times and perform batch striping.
Set frame rate, start and stop times and perform batch striping.
MIDI Interface and JLCooper PPS-2.
Enables communication with all USB versions of JLCooper controllers except the MCS3-USB. This supersedes all previously posted Windows drivers. JLCooper signed drivers.
This documentation details the configuration of the Compact Ethernet Interface (JLCooper P/N 920444-4) for the Eclipse MX, MCS-3000XL, RackShot and KeyShot and, the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394).
This utility allows the programming of macro messages and button labels in the KeyShot and RackShot. Supports v1.10M firmware only. Requires KeyShot or RackShot with RS-232, RS-422 or USB Interface card.
This utility allows a user to configure the Ethernet Interface in the MCS-Ethernet Interface 2 (p/n 920457), the Ethernet interface for the RackShot and KeyShot (p/n 920444-4) and the ES-450 Ethernet. This does not apply to the MCS-Ethernet Interface (p/n 920394). Requires the Microsoft .net Framework installed on the computer to run.